UltraClear is the world’s first cold fiber laser using MID IR Fiber (wavelength 2910 nanometers) to rejuvenate facial skin and reduce signs of aging. It achieves maximum energy absorption and interacts with skin tissue while leaving minimal residual heat on the surface. This significantly reduces the risk of PIH (Post-Inflammatory Hyperpigmentation) and PIE (Post-Inflammatory Erythema).
UltraClear employs an Erbium-based technology without the need for lamps, offering high stability and eliminating frequent energy recalibration. It is safe for all skin types and has been FDA-approved in the United States and certified by the Thai FDA. Additionally, it stimulates collagen and elastin production beneath the skin, resulting in brighter, smoother, and more youthful-looking skin.
UltraClear represents the latest breakthrough in technology, introducing a novel approach as an alternative to surgical procedures—or as a complement to them. It is the only device in the world that utilizes Laser Coring, which removes small, pinpoint areas of skin, including the full thickness of the dermis. The wounds are so small that they are barely visible. No general anesthesia or downtime is required—only topical numbing cream is needed, and treatment takes just 10–15 minutes.
Fiber laser: The laser is generated directly in the fiber, allowing for a firing speed of up to 5,000 Hz, making Laser Coring possible.
New 2910 nm wavelength: Offers effective removal of excess skin with minimal residual heat (only 5% thermal residue), ensuring safety for all skin tones and promoting rapid skin recovery.
Superior beam quality: With ultra-fine laser spots (170 micrometers), it enhances skin comfort and accelerates healing.
Ultra-fast 5,000 Hz speed: Patients experience little to no pain (in brightening mode, no numbing cream is needed), and treatment is extremely quick (only 10–15 minutes).
Benefits of UltraClear Treatment
The device operates with 6 different modes, tailored to specific skin concerns.
US FDA-cleared for the treatment of scars, wrinkles, pigmentation, and telangiectasia.
Coring & Ultra Mode tightens skin effectively on the face, neck, eyelids, and under-eye areas.
Can be used to enhance post-surgical results, especially for removing excess skin or for additional skin tightening—either in combination with surgery or after surgical procedures.
3D Miracle Mode offers gentle skin rejuvenation with no pain and no need for numbing cream.
Effective for treating loose or sagging skin across the body, including areas like the abdomen, arms, and hands.
Safe for all skin tones.
Suitable for all age groups.
Quick treatment sessions.
Minimal downtime after each session.
A versatile solution that addresses multiple skin concerns using just one device.
UltraClear is an advanced laser innovation that addresses multiple facial skin concerns in a single treatment. It delivers fast, safe, and highly effective results, making the skin visibly healthier and more radiant.
Fine lines and deep wrinkles: Helps smooth out both shallow and deep wrinkles for more even skin texture.
Dark spots and uneven skin tone: Fades pigmentation and promotes a more balanced complexion.
Mild to moderate melasma: Helps reduce the appearance of non-severe melasma patches.
Scars: Improves the appearance of various types of scars, making skin look smoother.
Acne scars and post-inflammatory hyperpigmentation (PIH): Reduces the visibility of acne-related scars and dark marks.
Texture and tone irregularities: Refines skin texture and evens out tone.
Facial lifting and firming: Tightens the skin for a more youthful contour and enhanced facial definition.
Reduces visible signs of aging: Noticeable results after just one session
Diminishes wrinkles and dark spots: Effectively reduces fine lines and pigmentation
Lifts and tightens the face and skin: Helps the skin appear firmer and more contoured
Improves scars: Promotes healing and smoothes the appearance of scars
Evens out skin tone: Reduces dullness and uneven skin pigmentation
Refines rough texture: Restores softness to rough or coarse skin
Removes dead skin cells: Encourages natural exfoliation of aged skin cells
Stimulates new skin cell production: Boosts the natural regeneration of healthy skin
Smooths and revitalizes skin: Gives a healthy, radiant, and youthful glow
Overall younger-looking skin: Leaves the skin fresher and more youthful overall
Can be combined with other devices: Safe to use in conjunction with other aesthetic technologies
Suitable for all skin tones: Effective and safe for all Fitzpatrick skin types
Short treatment time: Each session takes a relatively short time
Minimal downtime: You can quickly return to daily activities
Versatile solution in one device: Addresses multiple skin concerns with a single machine
Individuals seeking facial and neck skin tightening
Those who want to firm up areas of the body
People with fine lines and deep wrinkles
Those with dark spots or hyperpigmentation
Individuals with scars or acne scarring
Anyone wanting to improve overall skin quality
Pregnant women
Breastfeeding mothers
Individuals with certain medical conditions or implanted metal devices should inform their doctor for a safety and suitability assessment before undergoing treatment
Choosing UltraClear Laser Modes Based on Age and Skin Concerns
The choice of UltraClear Laser modes is not only based on the type of skin problem but can also be tailored according to the individual’s age group. This is because skin condition and needs vary at different ages. A specialist doctor will assess and design the most appropriate treatment plan for each patient.
Age Group: Late 30s to 65+
For individuals approximately aged 35 and older, including seniors, the UltraClear Laser Coring Mode is often the primary choice. This mode helps by removing small areas of skin to stimulate natural skin tightening, producing effects similar to a “non-surgical facelift.”
However, Coring alone may not be sufficient. Doctors usually recommend combining it with the Ultra and Clear modes to rejuvenate the skin on a deeper and more detailed level—such as evening out skin tone, filling wrinkles, and stimulating collagen production in the inner skin layers.
Age Group: Early 20s to 30s
Although younger individuals typically do not have significant wrinkles or sagging, they may experience localized skin issues such as acne scars, deep pitted scars from injury or inflammation, or uneven skin tone caused by sun exposure or certain skincare products.
In these cases, UltraClear Laser can help by using either the Ultra or Clear modes, depending on the problem, without necessarily needing to use the Coring mode.
Recent studies published in 2024 by Murray et al. showed that fiber lasers with a wavelength of 2910 nm—the same technology used in UltraClear—are highly effective in rejuvenating skin damaged by sun exposure, aging, deep wrinkles, and scars.
The average score on the Global Aesthetic Improvement Scale (GAIS) after three treatment sessions was 3.8, indicating a “very noticeable improvement.”
The average recovery time was only 5–7 days, faster than traditional ablative laser recovery.
Over 86.7% of patients expressed satisfaction with their treatment results.
1. Preparing Your Skin Before UltraClear Treatment
Stop using exfoliating products such as AHA, BHA, or Retinol at least 3–5 days before the procedure.
Avoid intense sun exposure and outdoor activities that expose your skin to direct sunlight for at least 3 days prior.
If you have severe skin infections like herpes or inflamed acne, consult your doctor before undergoing laser treatment.
2. UltraClear Laser Procedure
Cleanse your face: Begin by thoroughly cleansing your skin to prepare it for the laser treatment.
Apply numbing cream: Numbing cream is applied to the face and left on for about 45 minutes to minimize discomfort during the procedure.
Assess pain level: If you are concerned about pain, the doctor may consider additional pain management options tailored to you.
Remove numbing cream and clean the skin again: Before starting the laser, the numbing cream will be wiped off, and the face will be disinfected once more.
Start the laser treatment: The laser will be applied over the entire face, with the doctor selecting different modes (Coring, Ultra, and Clear) depending on your skin condition and specific concerns.
Duration: Approximately 30 minutes (may vary depending on individual skin).
Immediately after treatment: The doctor will apply soothing cream to reduce irritation and perform a cold compress for about 30 minutes.
First 24 Hours:
You may experience slight pinpoint bleeding from areas where the laser removed skin layers, but there is typically no pain.
If bleeding occurs within the first 3–12 hours, gently dab the area with a sterile cotton swab.
Avoid washing your face; instead, use sterile saline solution to gently cleanse the skin.
Apply antibiotic ointment and any prescribed medications every 4–6 hours to keep the skin moisturized and protected.
Strictly avoid sun exposure.
Days 2–3 (24–72 Hours Post-Treatment):
You can begin washing your face with plain water, but avoid foaming cleansers or facial washes with active ingredients.
Continue applying ointments regularly to maintain moisture and support skin healing.
Sunscreen should still be avoided during this phase.
Days 3–7:
You may resume normal facial cleansing with a gentle foaming cleanser or mild soap.
Mild peeling or flaking may occur—do not scrub or pick at the skin.
Some individuals may experience mild folliculitis (inflammation of hair follicles), which can be treated with medication from the clinic.
Skin will begin to show improvement, with reduced redness and ongoing recovery.
Days 7–14:
Skin will appear noticeably smoother and more even in tone.
You may resume your regular skincare routine, including the use of sunscreen.
You can return to your normal daily activities, but continue to protect your skin diligently from sun exposure.
1. Does UltraClear hurt?
UltraClear may cause mild discomfort, but numbing cream is applied beforehand. In some cases, additional pain-reduction techniques may be used. Most patients report a pain level of only 0–2 out of 10, which is easily tolerable. The experience may vary depending on the treating physician’s assessment.
2. Is one session enough, or how many are needed?
Most patients see noticeable results after just one session. However, for those with more significant skin issues or who desire more dramatic results, 2–3 sessions spaced 3–6 months apart may be recommended. Your doctor will provide personalized guidance.
3. When will I see results?
You’ll see about 20% of the results immediately due to skin contraction. The full results appear between 3–6 months, as your body gradually produces new collagen. Improvements in skin smoothness usually begin to show around 7–14 days post-treatment.
4. How long do the results last?
UltraClear delivers long-lasting results because it permanently removes damaged skin layers. Results typically last 1–2 years, depending on factors like age, lifestyle, and ongoing skincare routines.
5. When can I wear makeup after the treatment?
It’s recommended to avoid makeup for at least the first 72 hours to allow proper healing. If needed, light makeup can be applied after that, but for best results, wait until day 7.
6. Who is UltraClear suitable for?
UltraClear is ideal for individuals with fine lines, enlarged pores, or sagging skin who want noticeable, non-surgical results.
7. Who should avoid UltraClear?
Pregnant or breastfeeding women
Those with open wounds or active skin infections such as herpes or inflamed acne
Individuals with eczema, rashes, or inflammatory skin conditions
Patients with medical conditions that impair wound healing (e.g., SLE, scleroderma)
Those who recently received filler or collagen-stimulating injections should wait 4–6 weeks before undergoing UltraClear
8. How should I prepare for the treatment?
Avoid using any irritating skincare products, such as vitamin A acids or AHA, for 3–5 days before the procedure. Also, inform your doctor of any allergies, medications, or previous skin treatments.
ลงทะเบียนรับสิทธิพิเศษ
